Fog Cooler

Products
   Smoke Machines
   Hazers
   Specialist
   Heavy Fog

   Smoke Fluid
   Artificial Snow
   Special Effects
   Pyrotechnics

Sales / Hire
   How to order
   Hire
   FAQs

About us
   Who we are
   Contact

Basket

Call us on
(UK) 01642 769952
for advice and sales

BUY HEAVY FOG MACHINES

	LOW LYING HEAVY FOG COOLER
Self contained heavy fog smoke machine - no dry ice or CO2 needed!

Heavy fog machine

Self-contained
No dry ice, CO2 or liquid nitrogen needed - just plug-in and go!

When connected to any quality smoke machine, our Fog Cooler produces a low-lying smoke with an effect virtually indistinguishable from that created by dry ice. The conversion of normal fogger output to a floor-hugging cloud of dense fog can be regulated to produce either a continuous stream of low-lying fog or extremely large bursts of pure fog.

Electronic sensors allow the unit to constantly monitor its operating conditions in order to maintain the unit's optimal temperature. Finned evaporators can effectively cool large volumes of fog, with warm air being expelled through the high capacity vents located on the top of the unit. Operation can be as simple as placing the unit's intake within six inches (15cm) of a fog machine's output nozzle.

However, the fog cooler's output volume is regulated by the fog machine to which it is attached, so optimal performance is achieved by using a fog machine which allows complete control of its output volume. Additional performance enhancements can be achieved through the use of hoses to conduct the fog more efficiently. With the addition of the optional second fog conducting hose, the ground fog can be placed anywhere within 10m of the fog cooler's output nozzle.

Please refer to the diagrams below for examples of optimal implementations of the fog cooler.

A compact, completely self-contained unit, the DNG-100 requires no compressed gas cylinders or water tanks. In addition to its intelligent design, the DNG-100 is extremely easy to operate. No external controls are required, as the unit is fully operational upon being plugged in. Ease of operation is further ensured by the DNG-100's is used with a Low level or quick dispersing fog fluid which will dissipate so that it doesn't fog the air when reaching room temperature.

SPECIFICATIONS
Power: AC 230V/50Hz, 120V/60Hz
Power Consumption: 750 W
Start Current: 4000 W
Fuse: 125V / 7A, 250V / 3.15A
Refrigerant: R-408A
Dimensions: 750 x 607 x 390 mm
Weight: 72 kg

Options included:
FT-10, Fog Conducting Hose
FTA-10, Fog Hose Adaptor, (DNG input)
FTA-11, Fog Hose Adaptor (DNG output)
FTA-12, Fog output plate (used when no output hose is needed)

Optional Accessories: FTA-1/2/3 Tube adaptors (used to connect to the smoke machine)

Note: The DNG100 unit does not itself produce fog. You will need to use your existing smoke machine or choose one from below to complete the system.
Low fog / quick dispersing fluid must be used in one of the machines below to create the low fog (see below).

User manual PDF

Normal delivery time: usually 14 days. UK only.

DNG-100 Fog Cooler
- £1,980.00

Heavy Fog System
Includes Fog cooler, high ouput fog generator and 20 litres low fog fluid - £2,610.00

FT-10: 10 metre long ducting hose for this unit - £40.00

Suitable fog machines for use with the DNG-100 Fog Cooler:

Z-1500 II
• Heater: 1,500W
• Output: 20,000 cu ft/min
• Tank Capacity: 6 Litre
• Remote Included: Z-20 (LCD)
• DMX On-board w-DMX channel disp.
• Weight: 14Kg
• Dimensions: (mm): L 688 W 285 H 188

£395.00 Delivered

Add to basket

Z-3000 II
• Heater: 3,000W
• Output: 40,000 cu ft/min
• Tank Capacity: 6 Litre
• Remote Included: Z-20 (LCD)
• DMX On-board w-DMX channel disp.
• Weight: 19.9Kg
• Dimensions: (mm): L 735 W 310 H 192

£495.00

Add to basket

You can use any smoke machine with the fog cooler, but remember to use quick dispersing smoke fluid otherwise the area will become too foggy when the smoke eventually warms up and rises if it does not disperse.

Low Fog Fluid:

4 x 5 litres Antari FLR low fog fluid - special molecular fluid designed to clear at knee height when used in conjunction with the low fog machine.

Manufactured in Taiwan.

The fog fluid is a water-based composition that leaves no oily residue. It is odourless, non-irritating, non toxic, and non-flammable. Made from high quality food grade glycols which are diluted with purified and distilled water. This ensures that the product is virtually mineral and bacteria free.

For use in the X515, Z-1500 or Z-3000 or other Antari made smoke machines in conjunction with the DNG-100 fog chiller above. It will not give heavy fog without the DNG-100.

£135

Qty:

Related products:
Name	Description
Peasouper	Traditional dry ice heavy fog machine.
Freezefog Pro Low Smoke Converter	A hugely powerful and consistent heavy fog effect.
Rosco Coldflow	Converts output from smoke machines to create a powerful low lying fog effect.