There are 3 models available in the G Force range from Le Maitre.
G Force 1
Smoke
Machine
Unit shown above without bottle carrier fitted
The G Force 1 smoke machine features:
Continuous (ramped) fog output
Wide choice of special effect fog fluids, from long lasting
to extra quick dispersing
Control panel on back of unit with optional timer remote
control or DMX interface also available
Easy change block system - enables machine fluid pipe
to be changed without returning the unit for service
Features:
CONTINUOUS OUTPUT
Up to 425 cubic metres per minute of thick white fog!
SPECIAL EFFECTS FLUIDS
From industrial persistent fluid used by fire fighters to
an extra quick dispersing steam effect - we have the smoke
fluid to create the effect you need
RAPID CHANGE TECHNOLOGY (RCT)
The biggest issue with smoke machines is a plugged block
through normal wear and tear. Rapid Change Technology uses
a unique heat exchanger design allowing the fluid capilliary
to be changed on site, in less than 15 minutes, with no
special tools.
BOTTLE CARRIER INCLUDED
Allows a 5 litre fluid container to be mounted on the unit
for portability (see right)
A continuous output machine giving you the choice
of the full range of the special effect fluids from Le Maitre,
from long lasting to extra quick dispersing (see below).
Power
Requirements:
240v, 50hz, 1100W, 5A
110v version available upon request (or in stock US
base, see below)
The G Force 1 can generate virtual continuous
fog output, ramping fog output to 25% to maintain a continuous
flow.
Timer Variflow Remote gives smoke output duration
of 0 - 30 seconds and interval times of up to 20 minutes.
Fluid consumption:
3ml/sec. Short duration burst
0.75ml/sec. continuous output (ie 25%)
1 hour 40 minutes per 5 litre container
Variflow remote - variable output control
Varitime remote - allows easy timed control of smoke
output
G Force 2
Smoke
Machine
SORRY, NOW DISCONTINUED
G Force 3
Smoke
Machine
Shown without bottle carrier, which is supplied.
The G Force 3 is the latest smoke machine
from Le Maitre. Simply put, it is the world renowned G300 in a more compact chassis with improved controller, saving
a substantial amount on the purchase price of a G300.
2.2kW heat exchanger
Very high fog output with continuous flow option
Large heater block with twin output pipes
Twin fluid pumps for maximum flow
Digital fog output control (timer / DMX)
Easy-change heater block
It has integrated DMX and an on-board digital control panel,
utilising dual microprocessors.
Features:
2.2kW heater power.
Lower noise, smoother output, and more efficient
continuous running.
Dual processor circuitry with a digital
control panel.
Timed smoke output control
Includes a connection for use with the Freezefog
Pro.
Optional connection for controlling fans
up to 200W.
Built in DMX. (5-pin connectors)
External fluid bottle, with 5 litre bottle
carrier (included), reducing space requirements.
On-board control panel. Optional timer remote
control.
Controls – Smoke Output, Pre-Delay
(Freezefog use), Fan Speed (Optional output), Time on, Pause
time, DMX address, Options to bypass DMX address 2 &
3.
Separate Smoke On/Off.
Easy change block system - enables machine
fluid pipe to be changed without returning the unit for
service
Settings can be stored for instant recall on
power up. DMX can be locked for powering up in DMX mode. Analogue remote uses 5 pin XLR cable. Available
for 230v or 110v power supplies at no extra cost.
Editor's note:
The G Force 3, giving the same high smoke output level as
the G300, can be used with the Freezefog
Pro to create a massive heavy fog effect.
Shown with bottle carrier (supplied) and optional remote control
Power
Requirements:
220/240, 50Hz,
2,200w. 110v opt.
Length:
Width:
41cm
29cm
Height:
Weight:
20cm
12kg
Continuous output after huge initial
'blast' of smoke. Output ramps down to maintain contunuous
flow.
Fluid consumption:
8ml/sec. medium duration burst
1.5ml/sec. continuous output (ie 19%)
45 minutes per 5 litre container
G Force 3 Smoke Machine w/DMX control.
RRP
£1,842.00.
Industrial
Fluid - extra dense long lasting smoke for training,
testing and industrial use
Quick
Dispersing - ideal for effects, and
if you don't want to set smoke alarms off!
ALTERVATIVE PRODUCT:
Reliability, efficiency, performance.
Introducing the outstanding Pea
Soup Dragon PS27...
Consistent 100% full output, no ramping.
G Force 3 Smoke Machine w/DMX control. 
